Cutting technology has important applications in the processing of precision machinery and equipment. Good cutting technology can improve cutting efficiency and cutting quality. Both laser cutting and flame cutting belong to thermal cutting. What are the differences between them? 1. Laser cutting Laser cutting is using a high power density laser beam to irradiate the material to be cut, so that the material is quickly heated to the vaporization temperature and evaporated to form holes. Cut the seam to complete the cutting of the material. Since there is no tooling cost, laser cutting equipment is also suitable for producing small batches of parts of various sizes that were previously inaccessible. Laser cutting equipment usually adopts computerized numerical control technology (CNC) device. With this device, cutting data can be received from a computer-aided design (CAD) workstation using a telephone line. 2. Flame cutting Flame cutting is a common way of roughing steel plates. It cuts metal thicknesses from 1mm to 1.2m, but when the vast majority of mild steel plates you need to cut are below 20mm thick, other cutting methods should be used. Flame cutting is to use the high temperature generated during the combustion of iron oxide to cut carbon steel. The design of the flame cutting torch provides sufficient oxygen for burning iron oxide to ensure good cutting results. Flame cutting equipment is low cost and the only cost-effective means of cutting thick sheet metal, but it has its shortcomings when it comes to thin sheet cutting. Compared with laser, the heat affected zone of flame cutting is much larger, and the thermal deformation is relatively large. In order to cut accurately and effectively, the operator needs to have superb skills to avoid the thermal deformation of the metal plate in time during the cutting process.

The pipe laser cutting machine is also called a steel pipe laser cutting machine, which is different from the small laser cutting machine, and the pipe laser cutting machine is specially used to cut a metal steel pipe having a thickness. We all know that the cutting of the metal steel pipe is very difficult and requires large power and processing formats. The laser tube of the pipe laser cutting machine is a gemstone bar laser tube imported from foreign countries, and the cutting capacity of the metal is very large, and the absorption of the metal on this laser tube is very strong. Therefore, the cutting machine of the metal steel pipe is a ratio than an indispensable tool. Let's take a closer understanding of the product characteristics, scope of application and technical advantages of pipe laser cutting machines.
First, product features
The pipe laser cutting machine is equipped with a general power lamp pump laser, as long as it is in a certain processing web, the tubular laser cutting machine can cut any graphics. Moreover, the tubular laser cutting machine is most suitable for cutting the thin plate metal, and the processing speed is very fast and the accuracy is very high. Since the dynamic focusing device of the pipe laser cutting machine is followed by follow-up, it can automatically focus on the material of different thicknesses. The pipe laser cutting machine works and other cutters are different from the set of Vientiane rounds, which not only greatly reduces the labor, but also facilitates the upper and lower materials.
Second, the application range
The pipe laser cutting machine is widely used in the cutting of various thin plate metal materials, high precision, such as the nickel-molybdenum alloy, alloy steel, stainless steel, carbon steel, titanium, copper, aluminum, and alloys. Therefore, the pipe laser cutting machine is the election of various thick metal materials cut.
Third, technical advantages
For different diameters, cylinders in different directions, the tubular laser cutting machine can be co-holes, and can also cut the cylindrical line end ends on the branch end, which not only satisfies the univaled and branch axis of the main pipeline. The conditions of eccentric vertical intersection also satisfies the conditions of their tilt intersection. The pipe laser cutting machine can also cut the oblique end surface, branch coherent tip of the end of the circular tube. Whether it is the square hole, waist hole, or a variety of graphics of the square tube surface, and the steel pipe can also be cut off.
In summary, the pipe laser cutting machine is not overtaking in hardware facilities, or in a cutting method, it is the preferred choice for metal steel cutting. Moreover, the pipe laser cutting machine is very special in terms of technical features, scope of application and technology. Therefore, I believe that the pipe cutting machine, select the pipe cutting machine, is the choice of not boring in your hair.

There are many ways to fail in the fiber laser cutting machine, but if we find that the fiber laser cutting machine has failed, we should use a reasonable method to repair the fiber laser cutting machine in time. However, the cause of the fault phenomenon of the fiber laser cutting machine is different, so the solution we need to take is different.
Below, the small series will introduce you to the method of repairing the fault phenomenon of the fiber laser cutting machine:
First, the machine does not work: Check if the fiber laser cutting machine power cord switch is turned on; check if the power cord is connected to the power plug, whether it is loose; check if the panel power is turned on.
Second, the pump does not work properly: Check if the fiber laser cutting machine loop system is blocked; check the liquid level of the entire system to ensure that the pump can receive the liquid and check if the pump motor can be operated.
Third, there is no cooling or refrigeration: check whether the voltage is too low or too high; check whether excessive heat is transferred to the fiber laser cutting machine cooling liquid, resulting in a cooling capacity of the refrigeration system.
Fourth, the pump suction is insufficient: check whether the fiber laser cutting machine is limited; whether the voltage is too low or the fluid viscosity is too high.
When we maintain the fiber laser cutting machine, it is necessary to use the correct way. If the maintenance method is incorrect, it will laser the fiber laser and damage. Everyone finds that the fiber laser cutting machine cannot be resolved, it can contact the manufacturer to solve the manufacturer.